Jole stages ISOFIX I1507, Instruction Manual

Page: 23 / 33

43 44
!
Make sure that both ISOFIX
connectors are securely attached to
their ISOFIX anchor points. The
colors of the indicators on both
ISOFIX connectors should be
completely green.
7
-1
!
There are 9 adjustable positions
for ISOFIX. Press the ISOFIX
release button and push the base
back against the vehicle seat until
tight.
After placing the base on the vehicle
seat, extend the load leg to floor
8
-1 , when the load leg indicator
shows green means it is installed
correctly. Red means it is installed
incorrectly.
9
!
When the load leg indicator shows
red this means the load leg is in the
wrong position.
!
Make sure the load leg is in full
contact with the vehicle floor pan.
!
Squeeze the load leg releasing
button, then shorten the load leg
upwards.
8
9
1
7
8
1
10
1
2
12
1 2
13
1
2
!
The ISOFIX connectors must be
attached and locked onto the
ISOFIX anchor points.
10
-1
!
The load leg must be installed
correctly with green indicator.
10
-2
Please refer to baby mode and
toddler mode and junior mode in
section to use the stages™ isofix.
Removing the base
To remove base from the vehicle
press the release button
11
-1 and
pull the base back from the seat.
11
-2
Then press
12
-1 and pull back on
the ISOFIX connector
12
-2
!
For transporting base, press
ISOFIX release button
13
-1 and
move back ISOFIX connector so it
is folded completely
13
-2 .
11
1
2