Jole i-Harbour, Instruction Manual

Page: 11 / 147

11 12
!
Press the rotation button on either side to rotate the enhanced child
restraint.
5. Press the harness adjustment button while pulling the shoulder
harnesses to the desired length (Pull from below the fixed shoulder
pads to lengthen).
22
6. Unlock the buckle of the harnesses by pressing the red button.
23
7. Place the buckle tongues against the magnetic area on the outer
side of the enhanced child restraint so that the tongues are held in
place.
24
Remove the head support
portion of the infant insert
when the child’s
head no longer fits
comfortably.
Remove the body
portion of the infant
insert when the infant’s
shoulders no longer fit
comfortably.
Remove the infant insert
cushion by detaching the
snaps to allow more space
when the infant does not
fit comfortably. The
cushion can be used
separately without being
attached to the insert to
bolster the infant's back
for more comfort.
1
2
We recommend using
the full infant insert
while the baby is under
60cm and ≤13kg. It can be used
until they outgrow the insert.
The infant insert increases
side impact protection.
Use Infant Insert
8. Place the child into the enhanced child restraint and pass both arms
through the harnesses.
9. Engage the buckle. Please refer to
25
10.Rotate the enhanced child restraint to the rear facing position. The
enhanced child restraint indicator will show green.
26
11.Pull down the adjustment webbing and adjust it to the proper length
to make sure your child is properly secured.
27
!
Always keep child secured in harness and properly tightened
byremoving any slack.
Forward Facing Mode
(Child height 76cm-105cm/ Child weight
18kg/ Child’s Age 15 Month)
see images
28
-
34
!
Please install the enhanced child restraint on the rear vehicle seat,
and then place the child in the enhanced child restraint.
!
Please slide swivel lock button to left to rotate the enhanced child
restraint to the forward facing mode.
28
1. Press the rotation button to rotate for easier side loading/unloading
of the child, then rotate the seat to the forward facing position. 29
!
Press the rotation button on either side to rotate the enhanced child
restraint.
2. Press the harness adjustment button while pulling the shoulder
harnesses to the desired length (Pull from below the fixed shoulder
pads to lengthen).
30
3. Unlock the buckle of the harnesses by pressing the red button.
31
!
Remove the infant insert when in forward facing mode.
4. Place the buckle tongues against the magnetic area on the outer
side of the enhanced child restraint so that the tongues are held in
place.
32
5. Rotate the enhanced child restraint seat to forward facing the
enhanced child restraint indicator will show green.
33
!
Always make sure the seat is in locked position (rearward facing /
forward facing) even when the child is not in it.