3
4
!
NEVER give this booster to someone else without
also giving them this manual.
!
NEVER use a second-hand booster or a booster
whose history you do not know.
!
DO NOT use this booster without the soft goods.
!
The soft goods should not be replaced with any
besides the ones recommended by the manufac-
turer, because the soft goods constitute an inte-
gral part of the booster performance.
!
DO NOT use any load bearing contact points other
than those described in the instructions and
marked on the booster.
!
DO NOT face your booster toward the rear of the
vehicle.
!
To avoid burns, never put hot liquids in your
cupholders.
Emergency
In case of emergency or accidents, it is most important to have
your child taken care of with first aid and medical treatment
immediately.
Product Information
Read all the instructions in this manual before using this
product. If in doubt, consult either the booster manufacturer or
the retailer.
1. This booster is a ‘Universal’ child restraint. It is approved
to UN ECE regulation 44, 04 series of amendments, for
general use in vehicles and it will fit most, but not all, car
seats.
2. A correct fit is likely if the vehicle manufacturer has declared
in the vehicle handbook that the vehicle is capable of
accepting a ‘Universal’ child restraint for this age group.
3. This booster has been classified as ‘Universal’ under
more stringent conditions than those which applied to earlier
designs which do not carry this notice.
For Installation with Latch System and 3-point-belt
1. This booster is a ‘Semi-Universal’ child restraint. It
is approved to UN ECE regulation 44, 04 series of
amendments for general use in vehicles fitted with ISOFIX
anchorages systems.
2. It will fit vehicles with positions approved as ISOFIX
positions (as detailed in the vehicle handbook), depending
on the category of the booster and of the fixture.
3. If in doubt, consult either the booster manufacturer or
vehicle manufacturer.
Product
Booster
Suitable for
Child weighing 9-36kg
Mass Group
Group 1/2/3
Materials
Plastics, metal, fabrics
Patent No.
Patents pending
WARNING
