Joie tourist, Instruction Manual

Page: 11 / 132

19 20
Stroller Operation
Use Buckle
see images
15
-
16
Release Buckle
Press the center button to release the buckle.
15
Lock Buckle
Match the waist belt buckle with the shoulder
belt
16
- 1 , then
align them with the center buckle, the buckle can lock
automatically.
16
- 2 A “click” sound means the buckle is
locked completely.
16
- 3
! To avoid serious injury from falling or sliding out, always se-
cure your child with harness.
! Make sure your child is snugly secured. The space between
the child and the shoulder harness is about the thickness of
one hand.
! Do not cross the shoulder belts. This will cause pressure on
a child’s neck.
Use Shoulder & Waist Harnesses
see images
17
-
20
! In order to protect your child from falling out, after your child
is placed into the seat, check whether the shoulder and
waist harnesses are at proper height and length.
17
- 1 Shoulder harness anchor
17
- 2 Slide adjuster
For larger child, use shoulder harness anchor and the highest
shoulder slots. For smaller child, use shoulder harness anchor
and the lowest shoulder slots.
To adjust the position of the shoulder harness anchor, turn the
anchor to be level with the side facing forward. Thread it
through the shoulder harness slot from back to front. 18
Rethread it through the slot that is closest to child's shoulder
height.
19
Use slide adjuster to change the harness length.
20
- 1
Press the button
20
- 2 , while pulling the waist harness to
proper length.
20
- 3
Adjust Backrest
see images
21
-
22
Recline Backrest
Pull tab to recline backrest.
21
! Hold the backrest with the other hand if a child is already
seated in the stroller.
Raise Backrest
Hold both left and right strings and push up the angle adjuster
to raise backrest.
22
! Make sure the recline is set properly for use.
Adjust Calf Support
see images
23
The calf support has 2 positions.
Raise Calf Support
To raise the calf support, just push it upwards. A "click" sound
means the calf is locked completely.
Lower Calf Support
Press the adjustment buttons on both sides of the calf
support
23
- 1 , and rotate the calf support downwards.
23
- 2