15
16
Stroller Assembly
(Please refer to figures on page 1-9)
Please read all the instructions in this manual before assembling and using this product.
Open Stroller
Push secondary lock
1
-1
and squeeze one-hand-fold handle.
1
-2
Meanwhile, pull the stroller backward to
open. Latches should click into place.
2
!
Check that the stroller is completely open before continuing.
Assemble Canopy
See images
3
-
5
Assemble & Detach Armbar
The armbar can be pulled up on both left and right sides.
6
-
8
Press armbar release button
8
-1
, and then pull up the armbar.
8
-1
!
Armbar can be removable or pivot open for stroller entry.
The completely assembled stroller is shown as
9
Stroller Operation
Adjust Backrest Angle
Recline Backrest
Pull tab to recline backrest.
10
!
Hold the backrest with the other hand if a child is already seated in the stroller.
Raise Backrest
Hold both left and right strings and push up the angle adjuster to raise backrest.
11
!
Before adjusting the backrest to the upright position, to ensure the detachable seat liner will not be caught
into the stroller frame please fold in both sides of the seat liner.
!
Make sure the backrest angle is set properly for use.
Use Buckle
Release Buckle
Press the center button to release the buckle.
12
Lock Buckle
Match the waist belt buckle with the shoulder belt
13
-1
, then align them with the center buckle, the buckle
can lock automatically.
13
-2
A click sound means the buckle is locked completely.
13
-3
!
To avoid serious injury from falling or sliding out, always secure your child with harness.
!
Make sure your child is snugly secured, the space between the child and the shoulder harness is about the
thickness of one hand.
!
Do not cross the shoulder belts. This will cause pressure on child’s neck.
Use Shoulder & Waist Harnesses
!
In order to protect your child from falling out, after your child is placed into the seat, check whether the
shoulder and waist harnesses are at proper height and length.
14
-1
Shoulder harness anchor
14
-2
Slide adjuster
For larger child
﹐
use Shoulder harness anchor and the highest shoulder slots.
For smaller child
﹐
use Shoulder harness anchor and the lowest shoulder slots.
To adjust the position of the shoulder harness anchor, turn the anchor to be level with the side facing
forward. Thread it through the shoulder harness slot from back to front.
15
Rethread it through the slot that
is closest to child's shoulder height.
16
Use slide adjuster to change the harness length.
17
-1
, Press the button
17
-2
, while pulling the waist
harness to proper length.
17
-3
Adjust Calf Support
There are three angles for adjustment.
To raise calf support, push the calf support from position 1 to position 3.
18
To lower calf support, press the adjustment buttons on both sides of the calf support
19
-1
, and rotate the calf
support downwards.
19
-1
Use Canopy
To open the canopy, pull canopy toward front.
20
To fold the canopy, pull canopy toward back.
20
Switch Handle Direction
!
Make sure child’s hands and legs are clear from the armrest when switching the handle.
21
!
Front swiveling wheels or rear swiveling wheels can be locked automatically when you use the handle in rear
facing position or front facing position..
Use Front Swivel Lock
Press the front swivel locks to maintain the moving direction.
22
23
!
It is recommended to use swivel lock on uneven surfaces.
!
After switching the handle position, push the stroller forward to ensure that the wheels nearest to you are
locked and do not swivel.
24
Use Brake
To lock wheels, step on the brake lever. Front wheel is shown as
25
-1
, rear wheel is shown as
25
-2
Lift the brake lever to release wheel.
!
The brake must be engaged when placing and removing children.
!
Always apply brake when stroller is in stopped position.
!
To ensure brake is fully on, gently rock the stroller backwards and forwards before releasing the handle.
!
WARNING To prevent potential hazard, always make sure the parking device for all swiveling wheels are
engaged when you reverse the handle.
Use Drift
Press the drift button
26
-1
27
-1
, All wheels of the stroller can be rotated.
26
27
!
Please release front wheel orientation lock and rear wheel brake pedal before use drift.
!
When use drift, all wheels are in free rotation status, please be sure to push the stroller forward for a distance
to make rear wheels return to locked state after use drift, then stroller can be used normally.
