17
18
Fold Stroller
Please fold the canopy before folding the stroller.
20
Push secondary lock
28
-1
and squeeze one-hand-fold handle.
28
-2
Push the stroller forward to fold. A
click sound means the stroller is folded completely.
29
Use Accessory
Accessories may be sold separately or may not be available depending on region.
Use Shoulder Harness Cover
The shoulder harness cover can be removed from the webbing. Simply reverse these steps to re-assemble
shoulder harness cover.
30
Use Armbar Cover
The armbar cover can be removed from the armbar. Simply reverse these steps to re-assemble armbar
cover.
Use Head Support & Infant Insert
The head support can be removed by opening the buttons on both sides,
31
the infant insert can be removed by unfastening the buckle.
32
Detach & Assemble Soft Goods
See images
33
-
42
To re-assemble seat soft goods, follow the steps above in reverse.
42
-
33
Use Rain Cover
To assemble the rain cover, place it over the stroller, and then attach the hook and loop fasteners on the rain
cover.
43
!
When using the rain cover, please always check its ventilation.
!
When not in use, please check that the rain cover has been cleaned and dried before folding.
!
Do not fold the stroller after assembling the rain cover.
!
Do not place your child into the stroller assembled with rain cover during hot weather.
Care and Maintenance
1.
Removable seat pad may be washed in cold water and drip-dried. No bleach.
2.
To clean stroller frame
﹐
use only household soap and warm water. No bleach or detergent.
3.
From time to time check your stroller for loose screws
﹐
worn parts
﹐
torn material or stitching. Replace or
repair the parts as needed.
4.
Excessive exposure to sun or heat could cause fading or warping of parts.
5.
If stroller becomes wet
﹐
open canopy and allow to dry thoroughly before storing.
6.
If wheels squeak
﹐
use a light oil (e.g.
﹐
WD-40
﹐
antirust oil
﹐
or sewing machine oil). It is important to get the oil
into the axle and wheel assembly.
44
7.
When using your stroller at the beach
﹐
completely clean your stroller afterward to remove sand and salt from
mechanisms and wheel assemblies.
About disposal
1.
Follow the instruction of relevant municipal authority to dispose.
2.
Do not dispose it in a place other than that instructed, in order to protect the environment.
About After sales service
When the product malfunctions in use, a problem is found during check-up, replacement of parts or repair is
required, fixed part is loosened or squeaking, missing parts or wheel rotation is abnormal, or user finds any
other abnormal condition, stop using the product and check the product name, item number and lot number,
an contact our customer support center.
Precautions for Reparation
1. SG identification Reparation system was identified as SG product defects caused to physical injury
(personal injury) compensation system. This system does not compensate the loss or damage of product
itself with SG identification or other loss by the same cause,
2. When an accident occurred caused by product defect:
Please immediately contact the Product Safety Association.
After contacting, submit the notice of the accident issued by Product Safety Association (normally within 60
days after the accident)
Product Safety Association : xxxxxx (Address)
3. Information required for Accident Compensation
A. An accident caused by the product with SG identification
a) the product name, SG identification number
b) product purchase place and date
B. The accident situation
a) the date of the accident occurred
b) where
c) how the accident occurred
C. The injured personal information
a) name, age, sex, occupation, residential address
b) the status and extent of the injury
