Johnson Piantana 43, Instructions For Use Manual

Page: 8 / 24

8
SPECIAL SAFETY REQUIREMENTS
- Never insert your fingers or any other
object into the grills.
- Turn off and disconnect the appliance
before moving it.
- Do not position the appliance next to
open windows.
- Completely assemble the appliance be-
fore starting.
A ring nut
B back grill
X motor section
Y handle for grill B
C motor pin
C1 pin stem
D blade D
E ring nut
F front grill
G base bracket
H base bracket
L upright pole
M cap
N motor/upright pole fastening screws
P height adjusting ring nut
Q pin for swing selection
R inclination blocking knob
V fan intensity keys (1-2-3)
Z stop key
W position light
W1 key position light
Fan assembly
These operations must be carried out with
the plug disconnected from the power ou-
tlet.
1) Unscrew the ring nut (A) in a counter
clockwise direction.
2) Assemble the back grill (B) to the
motor section and secure it with the ring
nut (A).
Attention: the handle of grill B must be fa-
cing upwards.
3) Insert the blade (D) onto the motor pin
(C) and secure it with the ring nut (E).
(Make sure the stem (C1) of the pin coin-
cides with the groove on the blade).
4) Position the front grill (F) on the back
grill (B) by hooking it at the top with the
small hook (K) and aligning the bottom
with the two holes.
Insert the screws into the two holes and
secure with the nut.
Close the hooks positioned around the
circumference of the grill.
Assembling the cross stand
5) Join the two base brackets (G and H).
6) Position the pole (L) on the two brac-
kets and secure with the four screws.
7) Cover the screws by inserting the cap
(M) on the upright pole.
8) Insert the assembled fan on the
upright pole and secure with the screw (N).
Adjust the height of the pole via the ring
nut (P).
INSTRUCTIONS FOR USE
Start the ventilation by pressing keys
1 – 2 – 3 depending on the intensity you
want.
If you want to let the fan swing, press pin
Q downwards.
The inclination of the motor section can be
changed by loosening knob R and then re-
blocking it once the operation has been
completed.
Press 0 to stop the air flow.
To turn the light position W premre the W1
button.
CLEANING
Disconnect the appliance from the power
outlet and periodically remove dust from
the grills, motor section and blades with a
soft cloth. DO NOT use spray detergents
or solvents!