CHAPTER 5:
Troubleshooting
5.6 TROUBLESHOOTING - INCLINE MOTOR ISSUES
INCLINE MOTOR ISSUES
1) SYMPTOM:
a. The incline motor does not lift up or down.
2) SOLUTION:
a. Enter Engineering Mode, and scroll to ENG 1 (Hardware Test). Press the key “ENTER” first and then
the key ”START”.
-
Press the key “INCLINE
▲/▼”
.
If can hear click
from two relays at the MCB,
the MCB is ok. Then check the connection of
the elevation motor at the MCB first, try to unplug and re-plug these two pins. If can not resolve
the issue, replace the elevation motor.
If there is no beeps from these two relays, MCB is defective and replace the MCB.
20
