background image

www.johnsonsystems.com

3

Introduction

Multi-Station, multi-room manual DMX controls for a full DMX 

universe of control!
Value, power and complete flexibility in a “green”, user friendly, 

cost-effective package! The DMX Series of controls are the most 

capable manual “stand-alone” DMX controls available. These field 

programmable controls support 512 channels of DMX data with 

digitally adjustable fade times. Multiple stations can be daisy-chained 

together on the same control wire permitting multiple stations per 

room. Each station can be individually programmed with our wireless 

infrared hand-held programmer (Model Number: CS-IPRO) permitting 

any slider/channel assignments imaginable.
Available from single to 12 channels with master, preset and take 

control functions. Two and three button entrance station can be 

remotely “locked out” for application where access needs to be 

limited. This series of controls will operate on DC supply voltages 

up to 18 volts. Adjustable time fade and LED intensity allow 

customization for demanding applications. Durable powder-coat finish 

is available in either black or white.

CS-DMX Series

Programmable Manual

DMX Station

Features

•  Manual DMX at your fingertips.

•  Six models/sizes available including two and three button entrance 

stations.

•  512 DMX channels of control per station.

•  Multiple stations can be daisy-chained on the same DMX line.

•  Digitally adjustable fade-times and LED brightness.

•  Station programming via low cost, wireless infrared hand-held remote.

•  Local or remote/entrance station lockout options.

•  Short-circuit and over-current protection.

•  Ruggedly built for reliability and longevity.

•  Tough, durable powder coat paint on 0.080” aluminum laser cut 

faceplate for a scratch resistant non-glare finish.

•  Color matched and sized for use with Johnson Systems AP Series 

adapter plates where necessary to adapt to existing (larger) electrical 

back boxes.

•  Metal shaft sliders and machine screw mounting help prevent broken or 

missing parts.

•  Heavy-duty "high tactile" pushbutton switches are rated for 5 million 

operations.

•  Optional 6 Port Cascading Installation Merger permits low cost DMX 

universe combining.

CS-IPRO

Wireless Hand-held

Programmer

Summary of Contents for CS-DMX Series













Reviews: