1) Connect the brown wire to the positive (+) terminal of the battery, and the black
wire to the negative (-) terminal of the battery.
2) Important: All electrical wiring must be clamped with the connections well above
water level. Do not remove the insulation more than necessary. All wiring
connections should be sealed with a marine sealant to avoid oxidation.
Pump Operation:
1) Open your seacock to let in water and allow the pump to be flooded.
2) **Important** Make sure that when water has entered the pump that there are NO
Leaks coming from the intake or discharge of the pump. It is critical to check and
make sure there is no water leaking from any part of the pump during installation
and operation of the pump.
3) Turn your Livewell/Baitwell pump “On”
4) Your tank should fill up until water comes out of the overflow pipe
5) The pump will continuously exchange water as long as it is on.
6) Turn off pump when you are done fishing and are ready to drain your tank.
7) Close the seacock when pump/system is not being used. Never leave your boat for
extended periods of time without closing the seacock.
Optional Washdown Port
Your Livewell/Baitwell pump also has a port to be used for attaching a washdown pump.
Remove the ½ NPT plug from Livewell/Baitwell pump side port and attach your
washdown pump. Make sure to use sealant. Make sure that seacock is open before
turning on your washdown pump to ensure supply of water to washdown pump. Close
seacock valve after you are done with using your washdown pump.
CE Logo
When this product carried a CE mark, it conforms with the following standards:
ISO 8846: 1990/electrical Devices – Protection Against Ignition of Surrounding
Flammable Gases
Warranty Information
Johnson Pumps of America of 5885 11th Street, Rockford, Illinois 61109 warrants to the original consumer
purchaser that this product will be free from defects in material and workmanship, providing that the case is not opened or
the pump otherwise abused for a period of three (3) years from the date originally purchased.
The exclusive remedy of the consumer purchaser in the event the product does not meet this express Limited Warranty is
to return the pump to Johnson Pump at the above address, freight prepaid with your sales receipt. IMPORTANT: FOR
THIS WARRANTY TO BE EFFECTIVE, JOHNSON PUMP MUST BE SUPPLIED WITH THE ORIGINAL PURCHASE
DATE OF THE PRODUCT. THE ACCEPTANCE BY JOHNSON PUMP OF ANY PRODUCT RETURNED SHALL NOT BE
DEEMED AN ADMISSION THAT SUCH PRODUCT IS DEFECTIVE OR IN VIOLATION OF ANY WARRANTY. THE
COMPANY RESERVES THE RIGHT TO REPAIR OR REPLACE THE PRODUCT.
NO REPRESENTATIVE OR OTHER PERSON IS AUTHORIZED TO ASSUME FOR JOHNSON PUMP ANY
ADDITIONAL LIABILITY IN CONNECTION WITH THE SALE OF ITS PRODUCTS OR TO ALTER THIS WARRANTY IN
ANY WAY.
IN NO EVENT WILL JOHNSON PUMPS OF AMERICA BE LIABLE FOR MORE THAN THE SALES PRICE OF THE
PRODUCT. UNDER NO CIRCUMSTANCES WILL JOHNSON BE LIABLE FOR ANY LOST PROFITS, INCIDENTAL OR
CONSEQUENTIAL COSTS, EXPENSES, OR DAMAGES. THE LIMITATION ON LIABILITY FOR LOST PROFITS,
INCIDENTAL OR CONSEQUENTIAL COST EXPENSES OR DAMAGES SHALL SURVIVE ANY FAILURE OF
ESSENTIAL PURPOSE OF THIS LIMITED WARRANTY. Some states do not allow the exclusive or limitation of incidental
or consequential damages, so the above limitation may not apply to you.
NO EXPRESS OR LIMITED WARRANTY, INCLUDING WARRANTY OF MERCHANTABILITY AND FITNESS SHALL
EXTEND FOR ANY PERIOD OF TIME GREATER THAN THREE YEARS FROM THE DATE OF ORIGINAL PURCHASE
OF THIS PRODUCT. Some states do not allow limitation on how long an implied warranty lasts so the above limitation
may not apply to you.
CAUTION - Warranty void if seal on product is broken, if any electric cord is
cut back more than 3 inches, if electric splices become submerged, or if product is installed
contrary to instructions or warnings.
Johnson Pumps of America An SPX Brand
5885 11th Street
Rockford, Illinois 60133
Fax (847) 874-8011
spxflow.com
