o
Convert the colors used in the image to RGB color mode in the design/layout software before
printing.
o
If spot colors are used in the image (common for logos), convert the spot colors to RGB color
mode in the design/layout software before printing.
•
The sublimation paper is brown and sticking to the product.
o
The press/heat time may need to be decreased.
o
The press/heat temperature may need to be decreased.
o
The pressure setting may need to be decreased.
o
Use of a different sublimation paper brand or type may be needed for the particular product.
•
The sublimated image appears blurry or fuzzy.
o
The pressure setting may need to be increased.
o
The sublimation transfer paper may need to be secured to the product to prevent the paper from
moving.
o
The sublimatable surface of the product may be defective.
Templates and Images
•
Visit jpplus.com to find the product page for this item. The product template may be found under the
Tech Docs and Downloads area of the page.
To order more of this product, see similar products and much more, please visit jpplus.com.
For additional product support and troubleshooting, please contact JPPlus Advanced Support Team:
•
Phone: 419-500-4877
•
Email: [email protected]
•
Schedule an appointment: https://jpplusadvancedsupport.setmore.com/
