22
Set Up Cannon on the Humminbird Control Head
3
|
Adjust the Line Settings
Select the amount of Line on Spool, Line Type and Line Weight.
Change the Amount of Line on the Spool
Program the downrigger with the amount of line on the spool. The spool comes installed with 400 feet of stainless steel line, and
the Line on the Spool is set to the default of 400 feet. The range can be adjusted in 50 foot increments between the minimum of
150 feet and the maximum of 400 feet.
SOLIX Series
HELIX Series
1. From the
Cannon Settings
menu, select the Cannon you
want to adjust (Optimum 1, 2, 3 or 4).
2. Select
Line On Spool
.
3. Press and hold the slider, or press and hold the ENTER
key, to adjust the setting.
4. Repeat these steps for each additional Cannon.
1. From the
Bluetooth Cannon
menu, select the
Cannon
tab
you want to adjust (1, 2, 3 or 4).
2. Select
Line On Spool
.
3. Press the RIGHT or LEFT Cursor key to adjust the setting.
4. Repeat these steps for each additional Cannon.
Adjusting Line on Spool (SOLIX)
Adjusting Line on Spool (HELIX)
Set the Line Type
The default line type is Stainless Steel, but it can be set to either Braided, Stainless Steel or Mono.
SOLIX Series
HELIX Series
1. From the
Cannon Settings
menu, select the Cannon you
want to adjust (Optimum 1, 2, 3 or 4).
2. Select
Line Type
.
3. Tap, or press the ENTER key, to select your line type.
4. Repeat these steps for each additional Cannon.
1. From the
Bluetooth Cannon
menu, select the
Cannon
tab
you want to adjust (1, 2, 3 or 4).
2. Select
Line Type
.
3. Press the RIGHT or LEFT Cursor key to select your line
type.
4. Repeat these steps for each additional Cannon.
Summary of Contents for Humminbird Cannon Optimum
Page 1: ...Cannon for SOLIX and HELIX Accessory Manual 532768 1EN_A ...
Page 4: ...4 ...
Page 6: ...6 ...
