Johnson Outdoors Humminbird Cannon Optimum, Accessory Manual

Page: 14 / 38

14
Getting Started
3
|
Pair the Cannon to the Humminbird Control Head
Use the following instructions to pair the Cannon to the Humminbird control head.
Multi-Cannon Installations: If you have more than one Cannon installed, you only have to perform the pairing process for the control
head (and other accessories) once (i.e. you do not have to pair every device to all Cannons). When the Cannons are paired together,
your control head will operate all Cannons. See the
Optimum Owner’s Manual for information on pairing Cannons together.
Networked Control Heads: It is important to note that multiple control heads cannot be connected to the Cannon(s) at the same
time. You can pair multiple control heads, but only one HELIX control head or one SOLIX control head can be connected to the
Cannon(s) at the same time. Control heads that are networked together over Ethernet will share Cannon activity and menu settings
over the Ethernet network.
NOTE: If there is a mobile device paired to your control head, you must unpair it before pairing your Cannon to the control head. The mobile
device can be reconnected after the Cannon is successfully paired. For additional information on pairing a mobile device to your control
head, review your control head operations manual.
NOTE: Only one Cannon, Raptor or Talon can be paired to a control head at a time.
Pair the Cannon to the Control Head
SOLIX Series HELIX Series
1. Press the HOME key.
2. Select the
Bluetooth tool.
3. Under Cannon, select Cannon Settings .
4. Select Pair Device .
5. Enable Pairing Mode on the Cannon: Press the MENU
button on the Cannon. For multi-Cannon networks, do
this on the Master Cannon.
Select Settings > Bluetooth > Pair Humminbird > Pair
Humminbird.
6. The control head will beep when the pairing is successfully
completed.
If 30 seconds pass while in Pairing Mode and they do not
successfully pair, an error message will display signaling
that the pairing has timed out. Repeat the procedure.
1. Main Menu : Press the MENU key twice.
2. Select the Accessories tab.
3. Select Bluetooth Cannon . Press the RIGHT Cursor key.
4. Select Pair Device . Press the RIGHT Cursor key.
5. Enable Pairing Mode on the Cannon: Press the MENU
button on the Cannon. For multi-Cannon networks, do
this on the Master Cannon.
Select Settings > Bluetooth > Pair Humminbird > Pair
Humminbird.
6. The control head will beep when the pairing is successfully
completed.
If 30 seconds pass while in Pairing Mode and they do not
successfully pair, an error message will display signaling
that the pairing has timed out. Repeat the procedure.
Pairing the Cannon (SOLIX) Pairing the Cannon (HELIX)