manualshive.com logo in svg

Johnson Level & Tool 40-6560, Instruction Manual

Share
Download
Johnson Level & Tool 40-6560 Instruction Manual Download Page 7

©2005 Johnson Level & Tool

7

6. Operating Instructions

IMPORTANT: 

It is the responsibility of the user to verify the calibration

of the instrument before each use.

Battery Installation
Note:

Always check to be sure that the on/off switch is in the off

position before removing and replacing batteries.

Alkaline Battery Installation

1. Unscrew the press board of the alkaline battery case and remove

the battery cover.

2. Put in 4 “C” alkaline batteries (not included) according to the 

illustrated polarity direction.

3. Screw the press board to press against batteries.

Ni-MH Rechargeable Battery Pack Installation

1. Unscrew the press board of the alkaline battery case and remove

the battery cover.

2. Put in the Ni-MH rechargeable battery pack according to the 

outward direction of plug down-lead. Then insert the down-lead
plug into jack inside the instrument.

3. Screw the press board to press against batteries.

Ni-MH Rechargeable Battery Charging

Using the battery adapter (included), charge the rechargeable battery
pack through the outlet jack. When the charge indicator lamp turns
from red to green (after five hours or so), the Ni-MH rechargeable
battery pack has been fully charged.

40-6560_6570 English  5/5/05  4:30 PM  Page 7

Summary of Contents for 40-6560

























Reviews:

No comments

Brands by name

Popular brands

Load more brands