background image

 

13 

 

    Console   

 

Error 

code 

E01  E02  E03  E04  E05 

 

E06 

 

1

E01:

   

A: E01: Communication error between the console and controller when start machine. 

B: Solution:   

Check the 4 core wire connection between console and the controller whether 

unconnected or damaged. if the connecting line is firm, replace the IC board or the 

controller board to check whether it is the problem of the controller, or not, replace the 

console or IC if also appears E01.   

2

  E02:

   

A: E02: Controller does not detect the voltage of the wires of DC motor   

B: Solution

 

Check the positive and negative wires on the motor to see if the connection is firm with 

the terminals of controller. if connection is ok, please check all the components of 

controller to see if there is any damaged like power tube, or replace the controller or 

motor. 

3

 

E03:

   

A: E03: the controller cannot detect the speed feedback signal when motor running. 

B: Solution

 

1) check the motor to see if it starts, if it runs but then stops and shows E03, Please check 

whether the optical sensor is plugged disconnected or damaged. If all is in order 

change the optical sensor or replace controller and IC board. 

2) If the motor does not run and shows E03 when starting, please check whether the motor 

is jammed or damaged.. 

4

 

E04: 

A: Incline self-learning fault 

B: Check incline motor sensor wire and AC wire are inserted correctly; AC wire is correctly 

inserted according to the identify in the incline motor; make sure the incline motor wire is 

not damaged; after checking, press the button on controller, then start self-learning 

again. 

5

 

E05:

 

 

A: E05: The current is larger than the current protection when the motor is running 

B: Solution: 

Check whether the motor is abnormal or damaged; check whether there is any objects 

under the running belt

roller lead the rotational resistance increase. If there’s no problem, 

please replace the controller. 

 

If any other questions, please ask help from local distributors or our after-sales service 

department. 

5

 

The console display “

— — —

”:

 

  A: “— — —”stands for the console cannot received the signal from the safety lock. 

B: Solution: Check the safety magnet is in the correct position. Open the console cover, Check 

the safety switch line if plug is firm, Safety switch board is damaged or Safety switch fixed 

position is offset. 

Summary of Contents for Tempo Fitness T106



















Reviews: