Document Number: SE00458000-00
Page 6
1.
INTRODUCTION
This user manual provides general instructions for Nanomotion SE4 and SE8 motors. These
motors can be controlled and driven by different Nanomotion Drivers as well as by user developed
hardware. During planning and design of the motion system refer to both this manual and the user
manual for the Nanomotion Driver being used.
1.1.
CE COMPLIANCE
Nanomotion SE motors comply with the following directives:
Safety: IEC 61010-1:1990
EMC: 89/336/EEC as amended by 92/31/EEC and 93/68/EEC
Harmonized Standards to which conformity is declared:
EN 50081- 2:1993/EN 55011:1991
Generic Emission Standards Class A for radiated emission and Class B for
conducted emission.
EN 50082- 2:1995 Generic Immunity Standard
1.2.
CONVENTIONS USED IN THIS MANUAL
Throughout this manual commands are shown in BOLD and parameter values are shown in italics.
The following indicate information that is relevant to use and operation of the equipment.
NOTE
:
Notes provide additional information that is not included in the normal text
flow.
CAUTION:
Caution provides information about actions that will adversely affect system
performance.
BKM
Best Known Methods
:
Provides additional detailed information about operations and methods.
Danger
: Indicates operations or activities that may cause damage to
equipment or injury to personnel.
