background image

ZFR1811 Wireless Field Bus Router Installation Instructions

10

Repair Information

If the ZFR1811 Wireless

 

Field Bus Router fails to 

operate within its specifications, replace the unit. For a 
replacement ZFR1811 Router, contact the nearest 
Johnson Controls® representative.

Accessories

See Table 4 for information on accessories for the 
ZFR1811 Router. 

Technical Specifications       

Table 4:  Accessories

Product Code 
Number

Product Description

MS-ZFRRPT-0

Optional Repeater Accessory for use with ZFR1811 Router as a repeater. Includes power supply 
(20–28 VAC or 16-30 VDC input power and 12 VDC output power), and 4 x 4 in. electrical box with 
cover.

WRZ-SST-120

Wireless Sensing System Tool. Requires WRZ Series Sensor to function as a site survey tool for 
ZFR1800 Wireless Field Bus System, or for WRZ-7860-0 One-to-One Room Temperature Sensing 
System.

MS-ZFRCBL-0

Wire Harness with Connectors for use with MS-ZFR1811-x Router for Wireless Field Bus. Allows 
ZFR1811 Router to function with FEC1620 controller; and with FEC1610, VMA1610, or VMA1620 
controllers in conjunction with NS Series Sensors, MS-BTCVT-1 Wireless Commissioning Converter, or 
DIS1710 Local Controller Display.

ZFR-USBHA-0

USB Dongle with ZFR Driver provides a wireless connection through the CCT to allow wireless 
commissioning of the wireless-enabled FAC, FEC, IOM, and VMA16 controllers. The USB ZFR Dongle 
is also used with the ZFR Checkout Tool used to troubleshoot and validate ZFR wireless meshes using 
a laptop computer.

ZFR1811 Wireless Field Bus Router (Part 1 of 2)

Product Code Number

MS-ZFR1811-x

Power Supply Input

8 to 18 VDC, 15 VDC Nominal. Provided from the FC/SA BUS RJ-12 jack on the FEC or 
VMA16 controller.

Current Consumption

90 mA maximum

Addressing

DIP Switches, Field Adjustable.

Wireless Band

Direct-Sequence Spread-Spectrum, 2.4 GHz ISM Bands

Transmission Power

10 mW Maximum

Transmission Range 

76.2 m (250 ft)

 

Maximum Indoor Line-of-Sight; 15 m (50 ft) Recommended Indoor

Ambient Conditions

Operating:

 0 to 50°C (32 to 122°F), 5 to 95% RH, Noncondensing

Storage:

 -20 to 70°C (-4 to 158°F), 5 to 90% RH, Noncondensing

Materials

Translucent Plastic Housing with Plenum rating per UL1995 UL94-5VB Flammability 
Rating

Terminations

RJ-12 plug for connection to FEC or VMA16 FC/SA Bus jack

Dimensions

136 x 100 x 18 mm (5-3/8 x 3-15/16 x 3/4 in.)

Mounting Hardware

1/2 in. trade size Electrical Mechanical Tubing (EMT) connector

Summary of Contents for ZFR1811












Reviews: