WT-4000 Series Pneumatic-to-Direct Digital Control (DDC) Room Thermostats Installation Instructions
18
2.
Use the Up/Down buttons to select
Standalone
on
the menu (Figure 22).
3.
Press
to confirm the selection.
4.
Select
Date & Time
on the menu (Figure 23) and
press
to enter the setup screen.
5.
In the
Date & Time
menu (Figure 24), press
to highlight the menu options that require editing.
6.
Press the Up button
or the Down button
to change the value.
7.
Press
to confirm the selection.
8.
Repeat Step 5 through Step 7 until all of the menu
options are configured correctly. Press the Up
button
or the Down button
to scroll
through the date and time menu options.
9.
While in the configuration menu, use the Up/Down
buttons to navigate to
Weekday
to program the
weekday schedule.
10. Press
to open the weekday schedule.
11. Set the
Weekday 1
schedule (Figure 25), which is
usually the start of the Occupied Mode.
a.
Leave the top line as
Weekday 1
.
b.
Press the Up button
or the Down button
to scroll through the occupancy mode,
start time, and lower temperature limit menu
items.
c.
Press
to open a specific menu item.
d.
Press the Up button
or the Down button
to change the value, then press
to
save the setting.
Figure 22: Selecting the Stand-Alone Mode
F
IG
:st
nd
ln
_
m
de
Net Config
Fan Mode
Standalone
Maintenance
Standalone
FI
G
:d
te
_
tm
e_
m
n
u
Standalone
Date
&
Time
Weekday
Weekend
Figure 23: Selecting Date and Time
FI
G
:dt
e_t
m
e_
st
tn
gs
Month
01
Day
01
Hour
01
Minute
01
Year
2014
Figure 24: Setting the Date and Time
+
-
+
-
Weekday
1
Occupied
07:00
70
F
IG:
wd
y
_
1
Figure 25: Setting the Weekday 1 Schedule
+
-
+
-
