14-88360-03206, Rev. A
Attaching the Actuator to the Six-Way Valve
Use the valve key to adjust the valve stem
to a 90° angle, away from the curved section.
Ensure the valve stem is aligned as shown.
1
2
Press the manual override button on the actuator.
AC 24 V
DC 0(2).10V
BLK
RED GRY
ORN
1
2
3
4
Move the actuator lever to the extreme right position.
3
Align the top of the 6-way valve to the plate
at the back of the actuator.
4
5
Use a slotted screwdriver or a TORX® T-20 driver to
tighten the actuator screw to the 6-way valve. Tighten
to a torque of 0.9 to 1.4 Nm (8 to 12 lb-in).
Note:
The VA9905 Actuator fits VG1600 series valves only.
5