Johnson Controls Tyco KT-1, Installation Manual, Page: 54 / 56

UL 294 Compliance Notice
• Use only UL 294 or UL 1076 listed power supply.
• Connect Kantech part number KT-ACPW-LED status indicator to the AC terminals of the KT-
PS4085.
• Use Kantech part number KT-BATT-12 battery.
Note: Using a 12V/7Ah battery, backup battery provides a minimum of 4 hours standby time.
• For UL listed installations, use only in conjunction with compatible PoE/PoE+ devices that are
UL 294 listed. These devices shall be used in conjunction with UL listed transient protectors.
• The following Kantech readers have been validated by UL for the UL 294 Standard: P225W26,
P225KPW26, P225XSF, P225KPXSF, P325W26, P325KPW26, P325XSF, P325KPXSF, P600, KT-MUL-
SC, KT-MUL-SC-KP, KT-SG-SC, KT-SG-SC-KP, KT-MUL-MT, KT-MULMT-KP, KT-SG-MT, and KT-SG-
MT-KP.
• Communication between EntraPass and the KT-1 shall use a secure network to guard against
such threats as: Denial of Service (DoS), spoofing, sniffing, hijacking, Trojans, viruses/worms,
and malware.
UL 1076 Compliance Notice
• The KT-1 is UL 1076 Listed as a Commercial Proprietary Control Unit Accessory and
Proprietary Burglar Alarm Unit (Section 83.2), with EntraPass and Redundant Server, alarm
system features, KT-300, KT-400 Controllers, Kantech ioProx Proximity readers, and TRex
request to exit devices – other sensor devices (temperature, water level, etc.) may be used as
long as they are also UL 1076 Listed.
• The EntraPass and Redundant Server shall be running at all time, and manned 24 hours a
day, 365 days a year – The EntraPass and Redundant Server will each have their own operator
workstation.
• Data processing equipment and office appliance and business equipment used as central
supervisory equipment station shall be listed to Information Technology Equipment - Safety-
Part 1: General Requirements - UL 60950-1 or UL 62368-1.
• Should the EntraPass and/or Redundant Server be replaced, a UL 60950-1 or UL 62368-1
listed computer must be used.
• The following recommended system requirements apply to the EntraPass Server, Redundant
Server, Video Vault, Card Gateway, SmartLink, and Workstation:
- Operating Systems: Windows® 2008/Windows 2012/Windows 7 Standard/Enterprise
Server Editions/Windows 8/Windows 10
- Processor: Dual Core
- 4 GB RAM
- Minimum free hard disk space: 20 GB
- Color depth: 24-bit (16 million colors), required for Video Integration only
- Screen resolution: 1024 x 768
- AGP or PCI Express 8X graphics card with 64 MB memory and DirectX 9.0 support
- Network Interface card: 10/100 Base-T network adaptor
Note: Actual requirements may vary based on your operating system and
configuration.
• The Central Supervisory Equipment shall employ supply line transient protection complying
with the Standard for Transient Voltage Surge Suppressors, UL 1449, with a maximum
marked rating of 330 V.
• The Central Supervisory Equipment shall employ signal line Transient protection complying
with the Standard for Protectors for Data Communications and Fire Alarm Circuits, UL 497B,
with a maximum marked rating of 50 V.
• The Central Supervisory Equipment shall employ that communication circuits and network
components connected to the telecommunications network shall be protected by secondary
protectors for communication circuits. These protectors shall comply with the Standard for
Secondary Protectors for Communications Circuits, UL 497A. These protectors shall be used
only in the protected site of the telecommunications network.
52
KT-1 One-Door Controller Installation Guide