TFP2242
Page 2 of 4
1-5/16"
(33,3 mm)
ACROSS
WRENCH
FLATS
TYPE
AM10 or AM31
NOZZLE
CAP, LINK
AND CHAIN
ASSEMBLY
CLEARANCE HOLE
STANDARD SHEET
METAL PUNCH
3/16"
(4,8 mm)
MINIMUM
1/2"
(12,7 mm)
NOMINAL
MAKE-IN
2-3/16"
(55,6 mm)
INTERIOR
SURFACE
OF HOOD
1-9/16"
(39,7 mm)
THREADED
IFP FITTING
FITTING GROOVE
ENGAGED BY CAP
DETENT DIMPLES
NOZZLE
WRENCH
BOSS
ENGAGED
BY LINK
CHAIN ALIGNED
WITH NOZZLE
FRAME ARM
LOCKNUT
WASHER
3/4"
NPT
NOZZLE
DIFFUSER
CHAIN
NESTED
IN CAP
FACE OF
FITTING
WELD
SOCKET
1-1/16" DIA.
(27,0 mm)
1-5/16" (33,3 mm)
ACROSS WRENCH FLATS
1/2"
(12,7 mm)
CAP, LINK
AND CHAIN
ASSEMBLY
CLEARANCE HOLE
STANDARD SHEET
METAL PUNCH
3/16"
(4,8 mm)
MINIMUM
2-3/16"
(55,6 mm)
1-9/16"
(39,7 mm)
FITTING GROOVE
ENGAGED BY CAP
DETENT DIMPLES
NOZZLE
WRENCH
BOSS
ENGAGED
BY LINK
CHAIN ALIGNED
WITH NOZZLE
FRAME ARM
LOCKNUT
WASHER
SOCKET
WELD
IFP FITTING
NOZZLE
DIFFUSER
CHAIN
NESTED
IN CAP
FACE OF
FITTING
TYPE
AM10 or AM31
NOZZLE
INTERIOR
SURFACE
OF HOOD
SLOPED
HOOD
LINK
INSTALL LINK
WITH CHAIN
ALIGNED TO
FRAME ARM ON
LOW SIDE OF
SLOPE
DO NOT
INSTALL LINK
WITH CHAIN
ALIGNED TO
FRAME ARM ON
HIGH SIDE OF
SLOPE
SLOPED
HOOD
LINK
INCORRECT:
CORRECT:
FIGURE 1
TYPE AM10 OR AM31 AQUAMIST NOZZLE
THREADED RECESSED IFP FITTING INSTALLATION
FIGURE 2
TYPE AM10 OR AM31 AQUAMIST NOZZLE
SOCKET-WELD RECESSED IFP FITTING INSTALLATION
FIGURE 3
TYPE AM31 AQUAMIST NOZZLE
CHAIN ALIGNMENT
