R-22, 13 SEER
PHP024-060
2-5 Ton
ISO 9001
Certified Quality
Management System
166349-BIM-E-1008
TABLE OF CONTENTS
General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Limitations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Unit Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Site Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Clearances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
(Manufactured Housing) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Supply and Return Ducts . . . . . . . . . . . . . . . . . . . . . . . . . . 6
The Return — Air Grille Boxes . . . . . . . . . . . . . . . . . . . . . . 6
Wye Insulation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Discharge Duct Installation . . . . . . . . . . . . . . . . . . . . . . . . . 8
Service Access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Power And Control Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Power Wiring. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Control Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Wall Thermostat Installation . . . . . . . . . . . . . . . . . . . . . . . . . 10
Pre-start Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
System Startup, Check-out . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Other Features Incorporated In The Control . . . . . . . . . . . . . 11
Airflow Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Normal Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Typical Wiring Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . 18
LIST OF TABLES
1 Unit Limitations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2 Unit Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
3 Unit Clearances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
4 Demand Defrost Selection . . . . . . . . . . . . . . . . . . . . . . . 12
5 Electrical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
6 Physical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
7 Airflow Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
8 Additional Static Resistance . . . . . . . . . . . . . . . . . . . . . . 15
9 Electric Heat Minimum Supply Air . . . . . . . . . . . . . . . . . 17
10 Indoor Blower Specifications . . . . . . . . . . . . . . . . . . . . . . 17
11 Electric Heat Multipliers . . . . . . . . . . . . . . . . . . . . . . . . . 17
LIST OF FIGURES
1 Component Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2 Air Discharge Clearance . . . . . . . . . . . . . . . . . . . . . . . . . 4
3 Unit 4 Point Load Weight . . . . . . . . . . . . . . . . . . . . . . . . . 4
4 Unit Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
5 Return Air Box and Grille . . . . . . . . . . . . . . . . . . . . . . . . . 6
6 Wye Installation (Outlet) . . . . . . . . . . . . . . . . . . . . . . . . . . 7
7 Wye Installation (Inlet and Outlet) . . . . . . . . . . . . . . . . . . 8
10 Unit Component Location . . . . . . . . . . . . . . . . . . . . . . . 10
11 Thermostat Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
12 Switch Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
13 Defrost Operation Curves . . . . . . . . . . . . . . . . . . . . . . . 12
14 Demand Defrost “Curve” Selection Jumper . . . . . . . . . . 12
General
Model PHP units are factory assembled heat pump designed to
be installed along side the home or building. Field-installed
electric heater accessories are available to provide
supplemental electric heat.
The units are completely assembled on rigid base rails. All
piping, refrigerant charge, and electrical wiring is factory
installed and tested. The units require only electric power and
duct connections at the point of installation.
The electric heaters have nickel-chrome resistance wire
elements and utilize single point power connection.
Safety Considerations
This is a safety alert symbol . When you see this symbol on
labels or in manuals, be alert to the potential for personal injury.
Understand and pay particular attention to the signal words
DANGER
,
WARNING
or
CAUTION
.
DANGER
indicates an
imminently
hazardous situation, which,
if not avoided,
will result in death or serious injury.
WARNING
indicates a
potentially
hazardous situation, which,
if not avoided,
could result in death or serious injury.
CAUTION
indicates a potentially hazardous situation, which, if
not avoided
may result in minor or moderate injury.
It is also
used to alert against unsafe practices and hazards involving
only property damage.
Improper installation may create a condition where the
operation of the product could cause personal injury or
property damage. Improper installation, adjustment,
alteration, service or maintenance can cause injury or
property damage. Refer to this manual for assistance or
for additional information, consult a qualified contractor,
installer or service agency.
