Johnson Controls PG9200AX, User Manual

Page: 10 / 102

10 D-308403 29011054R001 PG9200AX
Mounting
Callout Description
A Do not mount the device on an unstable surface
B Do not mount the device on an unstable pole.
C Do not mount the device near trees or other objects that may block the
beam.
D Avoid mounting the receiver in direct sunlight. Sunlight can affect receiver
performance.
E Do not mount the device where the infrared beam from a different model can
reach the receiver
F Mount the device at a height between 0.7 m to 1 m (2.3 ft to 3.3 ft)
G When mounting on a pole, the pole diameter should be 34 - 48 mm (1.34" -
1.89").
H Mount the device at least 1 m (3.3 ft.) away from a wall or fence that is
parallel to the beam.
Caution
: Completely install all components of the detector to comply with the IP55 standard requirements.