background image

Light should be fused with 5 Amp Fuse (

ATM05 sold separately

)

Wire Colour

Function

Connect To

Red
Violet
Black
Blue
Yellow
White

Activate Colour #1 (Amber)
Activate Colour #2 (Blue)
Ground
Pattern Selection
Synchronization
Dimming

+12/24 VDC (Power)
+12/24 VDC (Power)
- Ground
+12/24 VDC (Power)
Synchronization Wire from other E-72 Unit
+12/24 VDC (Power)

1.0

   Pattern Selection

  -  Less than 1 second for the pattern change
  -  Hold for 5 seconds for the 

DEFAULT

 pattern (#1)

Briefly Connect Pattern Selection Wire (Blue wire) to Power Wires:

1.1

   Flash Patterns

#1  -  Rotational @ 60 RPM (

DEFAULT

)

#2  -  Random

#3  -  Single Flash [ 

SAE

 

]

#4  -  Quad Flash [ 

SAE

 

]

2.0

   Synchronizing

Do not connect synchronization wires together until all E-72 lamps have been separately set to
the same pattern. Once all lamps are set to the same pattern, connect all synchronization wires
together.

NOTE: Disassembling lamp or cutting the wires voids the warranty

INST

ALLA

TION MANU

AL

E-7211AB

Wiring Information

Switch #

Lamp Function

Switch 1
Switch 2
Switch 1 & 2
Switch 3
Switch 4

Colour 1
Colour 2
Dual Colour Mode
Pattern Selection
Dimming Function (optional)

3.0

   Suggested Switch Connection

(switches sold separately)

Operation:

Switch #1

ST100

(ON/OFF)

Switch #2

ST100

(ON/OFF)

Switch #3

ST108

(OFF-Momentary ON)

Switch #4

ST100

(ON/OFF)

Jumper Wires

From Battery Positive

Ground
Colour 1
Colour 2
Pattern Selection
Dimming Function
Synchronization

Battery Ground

Connect to all lamps

NOTE: If dimming function is not
           required, this connection
           can be skipped

Re

d

Violet

Blue

White

Yellow

Blac

k

Reviews: