PEAK® OEM 18 240 Volt SMART Equipment Controller Installation Instructions
10
Figure 11: 120/240 VAC Supply Power Terminal Block (Quick Connects Diagram)
Note:
The supply power wire colors may be different on transformers from other manufacturers. Refer to the
transformer manufacturer’s instructions and the project installation drawings for wiring details.
Note:
Refer to Table 4 for the acceptable wire type.
EOL Terminator Module
The MS-BACEOL-O RS-485 EOL Terminator provides the EOL termination on the FC Bus or N2 segments when
the device connected at the end of a bus segment does not have an integral EOL termination feature. The EOL
terminator is a compact, lightweight, module wrapped in a protective cover that you can quickly install in a variety of
ways. The EOL connects directly to the terminating device on a bus segment with the attached wire leads. The
EOL requires 24 VAC, Class 2 power which is supplied by the field device or another 24 VAC source.
SUPPLY POWER SPADE TERMINALS
DISCONNECT SUPPLY POWER TO THE
CONTROLLER BY UNPLUGGING THE SUPPLY
POWER QUICK CONNECTS FROM HOT AND NEUTRAL
SPADE TERMINALS.
W44
W38
W7
FUNCTIONAL EARTH
NEUTRAL
(N)
HOT
(L)
Section top view of PK-OEM18x 1-0
(Showing supply power spade terminals)
120/240 VAC SUPPLY INPUT
SUPPLY POWER
QUICK DISCONNECTS
WIRES FROM EXTERNAL CLASS 2
TRANSFORMER
FUNCTIONAL
EARTH
NEUTRAL (N)
HOT (L)