Johnson Controls PCA3613, Installation Instructions Manual

Page: 5 / 30

PCA3613 physical features
Figure 3: PCA3613 physical features
Table 1: Physical features
Callout Physical feature: description and references
1 Analog Output (AO) Terminal Block: Can be defined as Voltage Analog Output (0–10
VDC) or Current Analog Output (4–20 mA) (see Table 3)
2 Device Address DIP Switch Block (see Setting the Device Addresses )
3 Mounting clip
4 Binary Outputs (BO) Terminal Block: 24 VAC Triac (see Table 3)
5 24 VAC, Class 2/SELV Supply Power Terminal Block (see Supply power terminal block )
6 Cover Lift Tab (One of Two)
7 FC Bus Terminal Block (see FC bus terminal block )
8 SA Bus Terminal Block (see SA bus terminal block )
9 Sensor Port: (SA Bus) RJ-12 6-Pin Modular Jack (see Sensor port )
10 Binary Input (BI) Terminal Block: Dry Contact Maintained or Pulse Counter/Accumulator
Mode (see Terminal wiring guidelines, functions, ratings, and requirements )
11 Universal Inputs (UI) Terminal Block: Can be defined as Voltage Analog Input (0–10
VDC), Current Analog Input (4–20 mA), Resistive Analog Inputs (0–600k ohms), or Dry
Contact Binary Input (see Input and Output wiring guidelines )
5 PCA3613 Advanced Application Programmable Controller Installation Instructions