6. To reattach the electronic board to the base, flex the retainer and place the electronic board
under the electronic board edge supports. Then release the retainer back in place to fasten
the electronic board. See the following figure.
Figure 8: Reattaching the electronic board
Callout
Description
A
Electronic board edge supports
B
Retainer
7. Clip the cover onto the device base and tighten the cover screw. See the following figure.
Figure 9: Closing the device cover
8. Align the magnet bracket to the device according to the positioning marks. See Figure 10 A.
9. Screw the magnet bracket onto the door or window frame. See Figure 10 B.
10. Attach the magnet to the bracket. See Figure 10 C.
MC-302E PG+ Wired Input Door/Window Magnetic Contact Installation Guide
6
D-308441 MC-302E PG+ Rev. 0
