W.E.E.E Product recycling declaration
For information regarding the recycling of this product you must contact the
company from which you originally purchased it. If you are discarding this
product and not returning it for repair then you must ensure that it is returned
as identified by your supplier. This product is not to be thrown away with
everyday waste.
Directive 2012/19/EU Waste Electrical and Electronic Equipment.
About MC-302E PG+
The MC-302E PG+ is a two-way wireless PowerG magnetic contact device. The device includes a
built-in reed switch that opens when the magnet is removed from the contact. There is a separate
auxiliary hard-wired input used with additional sensors, for example, push button detectors, or
door contacts.
The device has the following features:
•
Two-way PowerG communication with the control panel
•
Front and back cover tamper detection
•
Periodic supervision message is transmitted automatically to the control panel at regular
interval
•
LED light signal strength indication during installation
•
Discreet transmission of supervision message
•
PowerG two-way frequency hopping spread spectrum time-division multiple access (FHSS-
TDMA) technology
•
Low battery indication
•
Remote firmware upgrade
•
User-selectable operation of auxiliary input as Normally open, Normally closed, End of Line
(EOL), Double EOL, or Triple EOL
•
Temperature sensing and reporting
Warranty
Visonic Ltd. (“
Seller
”) warrants the Products to the original purchaser only (the “
Buyer
”) against
defective workmanship and materials under normal use of the Products for a period of twelve (12)
months from the date of shipment by the Seller.
This Warranty is absolutely conditional upon the Products having been properly installed,
maintained and operated under conditions of normal use in accordance with the Seller's
recommended installation and operation instructions. Products which have become defective
for any other reason, according to the Seller's discretion, such as improper installation, failure to
follow recommended installation and operational instructions, neglect, willful damage, misuse or
vandalism, accidental damage, alteration or tampering, or repair by anyone other than the Seller,
are not covered by this Warranty.
There is absolutely no warranty on software, and all software products are sold as a user license
under the terms of the software license agreement included with such Product.
The Seller does not represent that Products may not be compromised and/or circumvented or that
the Products will prevent any death and/or personal injury and/or damage to property resulting
from burglary, robbery, fire or otherwise, or that the Products will in all cases provide adequate
13
MC-302E PG+ Wired Input Door/Window Magnetic Contact Installation Guide
D-308441 MC-302E PG+ Rev. 0
