LN Application Specific, Remote I/O, and Free Programmable Controllers
Installation Instructions
1
Refer to the
for the most up-to-date version of this document.
Application
Follow these recommendations for proper installation and subsequent operation of each controller:
•
Properly inspect the product for shipping damage. Do not install damaged controllers.
•
Record the 12-digit Neuron® ID located on either end of the device (shown on the sticker below the barcode)
for commissioning.
•
Operate the controller under the following conditions:
-
Ambient temperature:
LN-PRG203-2, LN-PRG300-2, LN-PRG4x0-2, LN-RTUL-1, LN-FCUL-1, LN-UVL-1, LN-HPUL-1: 32 to 158°F
(0 to 70°C), LN-IO301-1, LN-IO401-1 and LN-PRG5x0-2: 32 to 122°F (0 to 50°C)
-
Relative humidity: 0 to 90%, noncondensing
North American Emissions Compliance
United States
Canada
IMPORTANT:
Prevent any static electric discharge to the controller. Static discharge can damage the controller
and void the warranties.
Compliance Statement (Part 15.19)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.
Warning (Part 15.21)
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to
operate the equipment.
The term
IC
before the certification/registration number only signifies that the Industry Canada technical specifications were
met.
Industry Canada Statement
Le terme «IC» précédant le numéro d'accréditation/inscription signifie simplement que le produit est conforme aux
spécifications techniques d'Industry Canada.
LN Application Specific, Remote I/O, and Free
Programmable Controllers
Installation Instructions
LN-RTUL-1, LN-FCUL-1, LN-UVL-1, LN-HPUL-1, LN-IOxxx-1,
LN-PRG203-2, LN-PRG300-2, LN-PRG4x0-2, LN-PRG5x0-2
Code No. LIT-12011320
Issued December 2017
