NCB-EL/FL Network Applications
Configuration Four
62
IFI Routers/Repeaters Installation & Operation Manual - P/N: 53388:Rev: A1 5/5/09
8.4 Configuration Four
An NCB-EL/FL router can be used as a redundant router for another NCB-EL/FL. A sample
diagram is shown in
Figure 8.7 Example 4 Network Diagram
The Ether/Plug configuration settings for this channel is shown in
Figure 8.8 Configuration Example 4 View in Ether/Plug Application
The IP Central Site Member Name MUST be set to “None.” The member name Ech GW1 is to be
bound into the Echelon Gateway first. Then, Branch 1 is to be bound into the Echelon Gateway as
connected to the member Echelon Gateway. When the router that has the member name Branch 2
is bound into the Echelon Gateway, it must be set to “Redundantly Pair with an existing Router.”
Branch 2 will then be redundantly paired with the router Branch 1. This configuration will function
if either Branch 1 or Branch 2 router becomes inoperable.
Member Name: Branch 1
Host IP Address:
101.101.101.102
Member Name: Branch 1
Host IP Address:
101.101.101.103
Member Name: LAS
Host IP Address:
101.101.101.101
LAS
NCB-EL/FL
NCB-EL/FL
NION 1
NCB-EL/FL
NION 2
Wid
e Area Ser
ver