26
IFC-3030 Programming Manual —
P/N 52025:C 08/05/2005
Program
Panel Program
3.2.6 LCD Programming
The LCD Programming screen allows the user to vary the contrast of the display and turn the
backlight on or off.
Figure 3.10 LCD Display Screen
Soft Keys
BRIGHTER:
Press this soft key to increase contrast. The intensity will increase by approximately
5% with each press of the key.
DARKER:
Press this soft key to decrease contrast. The intensity will decrease by approximately
5% with each press of the key.
LANGUAGE:
Press this soft to choose the language that will display on the LCD. Menu choices are
ENGLISH
,
HEBREW
,
PORTUGUESE
and
SPANISH
.
To change the language display on an LCD-160, refer to “LCD-160 Download Menu” on page 81.
BACKLIGHT:
Press this soft key to select one of the following backlighting options:
ON
EXCEPT
AC
FAIL
,
OFF
, or
ON
. When
ON
EXCEPT
AC
FAIL
is selected, the backlight will turn off when
the power supply designated as the main power supply experiences AC failure. (The designation is
made at the Supervision screen using the
MAIN
POWER
SUPPLY
AC
FAIL
ADDRESS
field. Refer
Default:
ON
DEFAULT:
Press to select the factory default setting (60%).
CURRENT:
Press to select the intensity that was in effect when the screen was accessed..
ACCEPT:
Line 5 (which displays
LCD INTENSITY: 50%
in the figure above) will change
value when the
INTENSITY
soft keys are pressed. Press
ACCEPT
to save the desired setting.
3.2.7 ACS Programming
An ACS device is a remote device used by the panel to annunciate certain system messages, and/or
to act with limited commands. A total of 32 annunciator devices may be present on the EIA-485
ACS circuit; however, some devices have associated expander devices, and an IFC-3030 ACS
circuit can accomodate up to 3,072 annunciator points. The ACS Programming and ACS Point
L C D P R O G R A M M I N G
L C D I N T E N S I T Y : 5 0 %
B R I G H T E R
D E F A U L T
D A R K E R
C U R R E N T
L A N G U A G E : E N G L I S H
A C C E P T
B A C K L I G H T
O N E X C E P T A C F A I L
B A C K
Summary of Contents for IFC-3030
