Johnson Controls IFC-3030, Programming Manual

Page: 81 / 156

IFC-3030 Programming Manual — P/N 52025:C 08/05/2005 81
Bootloader Screen Service Screens
5.3 Bootloader Screen
This screen is used for LCD-160 and Loop downloads. To display this screen, press the RESET key
during the entire power-up self-testing process, then release the key.
Figure 5.5 Bootloader Menu Screen
LCD-160 DOWNLOAD:
Press this soft key to display the LCD-160 Download menu screen.
REBOOT:
Press this soft key to reboot the panel, and exit the bootloader screen.
LOOP DOWNLOAD:
Press this soft key to display the Loop Download Menu screen.
5.3.1 LCD-160 Download Menu
The language and banner displayed on LCD-160s can be programmed at this screen.
Figure 5.6 LCD-160 Download Menu Screen
ADDRESS:
Press this soft key to scroll through to the desired LCD-160 address. “All” means all
addresses. Default:
ADDRESS 001
.
Shortcut: Type 1 on the keyboard, which jumps to address 10, or type 2 for twenty, 3 for thirty,
0 to reset back to 1. Type an asterisk (*) to select all addresses.
T R O U B L E
L O A D I N G . . N O S E R V I C E
L A K E V I E W G E N E R A L H O S P I T A L
B O O T L O A D E R
1 1 : 5 8 : 4 5 A W E D A U G 2 5 , 2 0 0 4
R E B O O T
L C D - 1 6 0 D O W N L O A D L O O P D O W N L O A D
T R O U B L E
L O A D I N G . . N O S E R V I C E
L A K E V I E W G E N E R A L H O S P I T A L
N 0 0 1
B O O T L O A D E R
L C D - 1 6 0 D O W N L O A D M E N U
1 1 : 5 8 : 4 5 A W E D A U G 2 5 , 2 0 0 4
A U T O
A D D R E S S : A D D R E S S 0 0 1 S T A R T
D O W N L O A D T Y P E : L A N G U A G E - S P A N I S H B A C K