Johnson Controls HIDH018B21S, Engineering Manual

Page: 457 / 668

CONTROL SYSTEM
TC-15001-rev.3
6-141
1. Insert the memory card into the
controller. (Refer to 6.9.9 “Use of
Memory Card”.)
2. Select “Memory Card” from the
“Service Menu” screen.
NOTE:
This function is not available when
the memory card has not been
inserted.
3. Select “Read from the memory card”
from the “Memory Card Menu”.
NOTE:
3XWWKH¿OHWRUHDGLQWKHPHPRU\
card.
Ɣ Under the /CS-EZ folder
Ɣ Under the subfolder of the /CS-EZ
folder. (This function is not an
option if the /CS-EZ folder does not
exist.)
4. Select the folder to read.
Ɣ ,QWKHIROGHU¿HOGWKHIROGHUULJKW
under the /CS-EZ folder of the
memory card will be displayed.
5. 6HOHFWWKH¿OHWRUHDG
Ɣ ,QWKHIROGHU¿HOGWKHVHWWLQJVGDWD
¿OHXQGHUWKHIROGHUVHOHFWHGZLOOEH
displayed.
Ɣ Touch “File name” to rearrange the
order depending on the name of the
¿OH7KH³ ” denotes descending
order and “ ” denotes ascending
order.
Ɣ Touch “Update” to rearrange the order
GHSHQGLQJRQWKHGDWHRIPRGL¿FDWLRQ
The “ ” denotes descending order
and the “ ” denotes ascending order.
<Automatic Backup>
* The setting data will be saved in the
memory card just before reading.
If incorrect data is read, the setting
can be restored to the previous
data. (Refer to Section 6.9.11.9.4.)
* Only one instance of settings data
will be saved on each memory card
DVDQ$XWRPDWLF%DFNXS¿OH
Note that all settings data will be
deleted except the latest data.
* If the Automatic Backup failed,
WKHFRQ¿UPDWLRQVFUHHQZLOOEH
displayed. Touch “Yes” to continue
or “No” to quit.
6. Touch “Read” to start to read the
data.
7. Touch “Completed” on the
FRQ¿UPDWLRQVFUHHQWRUHWXUQWR
“Memory Card Menu” screen.
6.9.11.9.3 Restore Setting (Read from Existing File)
3
7
2
4
5
6
Continue on to Next Page