Canada
Industry Canada Statement(s)
The term
IC
before the certification/registration number only signifies that the Industry Canada
technical specifications were met.
Le terme « IC » précédant le numéro d'accréditation/inscription signifie simplement que le produit
est conforme aux spécifications techniques d'Industry Canada.
Installation
Follow these guidelines when installing the FX-WRZ Series Sensors:
• Transport the sensor in the original container to minimize vibration and shock damage.
• Verify that all the parts shipped with the sensor.
• Do not drop the sensor or subject it to physical shock.
• Do not attempt to remove or repair the circuit board from the sensor housing. Other than
battery replacement, the sensor is not user-serviceable.
Parts included
• One FX-WRZ Series Sensor with strips of double-sided adhesive foam tape installed
• One DIP switch overlay for a mesh network application using an FX-ZFR18xx Series Router
• One DIP switch overlay for a One-to-One application using an FX-WRZ7860 Receiver
• One installation instructions sheet
• Two AA alkaline batteries
Dimensions
See Figure 1 for dimensions and physical features of the FX-WRZ Series Sensors.
Figure 1: FX-WRZ Series Sensor; LCD with setpoint adjustment
buttons model shown physical features and dimensions, mm (in.)
Temperature and Relative Humidity FX-WRZ Series Wireless Room Sensors Installation Instructions
2
