Table 8: FX-PCX37 Technical Specifications
Input/Outputs:
Fixed Screw Terminal Blocks
SA/FC Bus and Supply Power:
4-Wire and 3-Wire Pluggable Screw Terminal
Blocks
SA/FC Bus Port:
RJ-12 6-Pin Modular Jacks
Terminations
Horizontal on single 35 mm DIN rail mount (preferred), or screw mount on flat surface
with three integral mounting clips on controller
Mounting
Enclosure material: ABS and polycarbonate UL94 5VB; Self-extinguishing, Plenum
Rated
Protection Class: IP20 (IEC529)
Housing
150 x 190 x 53 mm (5-7/8 x 7-1/2 x 2-1/8 in.) including terminals and mounting clips
Note:
Mounting space requires an additional 50 mm (2 in.) space on top, bottom
and front face of controller for easy cover removal, ventilation and wire
terminations.
Dimensions(Height x Width x Depth)
0.5 kg (1.1 lb)
Weight
United States:
UL Listed, File E107041, CCN PAZX, UL 916, Energy Management
Equipment; FCC Compliant to CFR47, Part 15, Subpart B, Class A
Note:
Except FX-PCX3711-2
Compliance
Canada:
UL Listed, File E107041, CCN PAZX7 CAN/CSA C22.2 No.205, Signal
Equipment; Industry Canada Compliant, ICES-003
Note:
Except FX-PCX3711-2
Europe:
Johnson Controls, Inc. declares that this product is in compliance with the
EMC Directive and Low Voltage Directive. Declared as Independently Mounted
Intended for Panel Mounting, Operating Control Type 1.B, 4kV rated impulse voltage,
100.7°C ball pressure test.
Note:
Except FX-PCX3711-0
Europe:
Johnson Controls, Inc. declares that this product is in compliance with the
essential requirements and other relevant provisions of the EMC Directive.
Note:
Except FX-PCX3711-0
Australia and New Zealand:
RCM Mark, Australia/NZ Emissions Compliant
Note:
Except FX-PCX3711-0
BACnet International:
BACnet Testing Laboratories (BTL) Protocol Revision 4
Listed BACnet Application Specific Controller (B-ASC)
The performance specifications are nominal and conform to acceptable industry standard. For application at conditions
beyond these specifications, consult the local Johnson Controls
®
office. Johnson Controls, Inc. shall not be liable
for damages resulting from misapplication or misuse of its products.
APAC Single Point of Contact:
NA/SA Single Point of Contact:
European Single Point of Contact:
JOHNSON CONTROLS
C/O CONTROLS PRODUCT MANAGEMENT
NO. 22 BLOCK D NEW DISTRICT
WUXI JIANGSU PROVINCE 214142
CHINA
JOHNSON CONTROLS
507 E MICHIGAN ST
MILWAUKEE WI 53202
USA
JOHNSON CONTROLS
WESTENDHOF 3
45143 ESSEN
GERMANY
19
FX-PCX37 Expansion Input/Output Module Installation Instructions
