3. Drill holes in the wall or surface at the marked locations, and insert appropriate wall anchors in
the holes (if necessary).
4. Hold the controller in place, and insert the screws through the mounting clips and into the
holes (or wall anchors). Carefully tighten all of the screws.
Important:
Do not overtighten the mounting screws. Overtightening the screws may damage
the mounting clips.
Mounting Features and Dimensions
Figure 2: Back of FX-PCX17 or FX-PCX27 Controller showing extended mounting Clips, DIN
rail channel and mounting dimensions, mm (in.)
FX-PCX17 and FX-PCX27 Expansion Input/Output Module Installation Instructions
4
