Introduction—FC-2000 Introduction 5
Dummy Load Resistor 4.7K, 1/2 watt (71245)
End-of-Line Resistor 4.7K, 1/2 watt (71252)
Power Ribbon (71085)
Main Bell Power Harness (71093)
Power Harness (71086)
First-Row Ribbon Cable (71087)
KEY #
PWD #
progmkey
CPU Programming Key (PK-1)
CPU-2000 Central Processor Module
This module is the heart of the FC-2000. It controls and monitors the
system modules and provides a full accounting of system status. In
addition, the CPU contains two indicating appliance circuits, a remote
signaling municipal tie circuit, and Form-C alarm and trouble
contacts. Field programming of the system is accomplished from this
module via the use of the programming key (PK-1). Slide-in labels
for programming, control, and system operation are provided with the
CPU, as well as end-of-line and dummy load resistors.
bp 3
G rou n d F a ult
G rou n d F a ult
B att ery Fail
A C P ow er F a il
CAUTION
120 V A C U N D E R PA N E L
W AR NING
S everal D iff erent S ources of P owe r can be
Co n n ect e d to this C on trol Un it. D isc on ne ct
all So u rce s o f Po we r B e fore Se rvicin g .
BP-3 Battery Dress Panel
Covers the MPS-24A/B and the batteries in the FC-2000.
BE-2000 Basic
Equipment
Package
