,QVWDOODWLRQ0DQXDO
6
2
.
3.
4.
5.
Remove the cable clamp, connect the connection cable and
power cable with the terminal at the row of connection and fix
the connection. The fitting line distributing must be consistent
with the indoor unit terminal of line bank.
1.
Remove the handle at the right side plate of the
outdoor unit (
10
screw
s
).
Wiring should meet that of indoor unit.
Fix power connection wire
using
wire clamp.
Ensure wire has been
secured
well.
Install the handle.
An all-pole disconnection switch having a contact
separation of at least 3mm in all pole
s
should be
connected in fixed wiring.
Wrong wire connection may cause malfunction of some
electric components.
After fixing cable, ensure that
leads between connection to fixed point have some space.
The connect
ion pipes and the connection wirings of
units
A, B, C and D must
correspond
to each other
respective
ly
.
The appliance shall be installed
in accordance with
national
and local
wiring regulations.
Do not install the outdoor unit where it is exposed
to the
sun
.
HANDLING
DHM30CMB21S
To the power supply
To unit B
To unit A
connection
cable
connection
cable
To unit C
connection
cable
To unit D
connection
cable
Outdoor unit
Indoor unit
L1 L2
L1
L1
L2
L2
Power
cable
A
B
C
D
connection cable
connection cable
connection cable
connection cable
1)
The power cable should be put in from the hole under
connection cable cover.
2)
If connecting with two indoor units, the connection cable
should be put in from hole A and hole B
3)
If connecting with three indoor units, the connection cable
should be put in from hole A , B and C
4)
If connecting with four indoor units, the connection cable
should be put in from hole A, B , C and D.
N(1)
2 3
N(1)
2 3
N(1)
2 3
N(1)
2 3
A
B
C
D
power
cable
After having removed the packaging, check that the
contents are intact and complete.
The outdoor unit must always be kept upright.
Handling must be done by
certified technician
using
equipment that is suitable for
the weight of the
appliance.
All power cables and connection cables must be protected with
conduits.
Summary of Contents for DHM18CMB21S
Page 52: ...44 ...