1. Press both “Off Timer” and “Filter Sign Reset” for three seconds.
2.
If the current setting is “Non-display”, the selected item will fl ash 0.5 seconds, then it will turn OFF.
If the setting is “Display”, it will light continuously.
3. The setting content “Display” or “Non-display”can be changed by pressing the “ On” button.
4. Press “ ” to change the item number in ascending order. (No.
1 → 2 → 3 .... 7
)
Press “ ” to change the item number in descending order. (No.
1 → 7 → 6 .... 2
)
5. Select the item number with “ ” or “ ”, change the setting content by pressing “ On” button and
fi nally exit the optional function setting by pressing the “
Off ” button to perform the reset.
NOTES:
1. The optional function setting will automatically end and reset if no operation is performed
within 60 seconds after it is displayed.
2. The setting will be recorded each time the “ On” button is pressed.
6. Optional Function Setting
The display range of the wireless controller can be set, following the function to set the indoor unit.
ATTENTION:
The settings cannot operate correctly even if the functions which cannot set the indoor unit, are
set with the wireless controller. Concerning the functions which can set the indoor unit, refer to
the operation manual of the indoor unit.
Buttons
“ On” Buttons
“ ”
Button
“ ”
Button
1
Operation Mode “AUTO”
Display
/
Non-display
2
Operation Mode “HEAT”
Display
/
Non-display
3
Operation Mode “DRY”
Display
/
Non-display
4
Temperature Setting
ºC
/
ºF
5
Celsius Scale
1ºC
/
0.5ºC
6
Fan Speed Levels
3 steps / 4 steps / 6 steps
7
Fan Speed “AUTO”
Display
/
Non-display
NOTE: The selected items are set when restoring settings.
Press the “ Off” switch to exit the function selection.
■ Optional Function Setting Procedure
No.3 Operation Mode “DRY”
No.1 Operation Mode “AUTO”
No.2 Operation Mode “HEAT”
No.4 Temperature Setting
No.7 Fan Speed “AUTO”
No.6 Fan Speed Steps
No.5 Celsius Scale
P5415475
8