AD-1272 Advanced Thermal Dispersion Probe Airflow Measuring System Technical Bulletin
39
Sensor Management
The Sensor Management submenu is used to scan the sensor network for active sensors and enable or disable
individual sensors. This also displays each sensor’s velocity and temperature reading.
Probes are numbered with P=Primary, 0=First Achillary, 1=Second Anchillary, and so on. Sensor information is
displayed on the left-most sensor in the enclosure at the end of the probe.
Note:
When the Primary Transmitter with Display is located remotely the AD-1272 count the Primary Transmitter
as an additional probe. This will cause the number of probes to be shown as one greater than the number
of ancillary probes.
Figure 66: Sensor Management Flowchart
UP
DOWN
Scan for Sensors
Sensor
Management
UP
DOWN
ENTER
ENTER
ESC or ENTER
ESC
ENTER
Display Sensor
Status
ENTER
ESC
UP
DOWN
Enable Sensors
ENTER
UP DOWN
ESC
Disable Sensors
ENTER
ESC
Display Probe
Status
ENTER
UP
DOWN
ESC
*Default values shown
UP
DOWN
Display Probe
Data
ENTER
ESC
Exit this Menu
UP
DOWN
ENTER
DOWN
Display Active
Sensors
UP
Selected Submenu
Submenu Selections
Submenu Selection Display
FI
G
:f
lo
w
ch
a
rt
_
se
n
so
r_
m
g
m
t
Returns to
Operator Menu
