Table 1: Reset Button Operation and Descriptions
Reset Operation
2
Reset
Function
1.
Press and hold the reset button for 2
seconds. The Fault LED displays Slow
Flicker behavior.
2.
Release the reset button within 3
seconds. The Fault LED displays Fast
Flicker behavior.
3.
Within 5 seconds, press the reset button
again, and then immediately release it. (If
you press the reset button for longer than
5 seconds, the reset operation is
cancelled.)
The SSID and passphrase are reset to
factory defaults, the LEDs stop flickering
for 2 seconds, and then the LEDs return
to normal operation, based on the current
state of the device.
Reset SSID
and
Passphrase
1.
Press and hold the reset button for 6
seconds. The Fault LED displays Slow
Flicker behavior.
2.
Release the reset button within 3
seconds. The Fault LED displays Fast
Flicker behavior.
3.
Within 5 seconds, press the reset button
again, and then immediately release it. (If
you press the reset button for longer than
5 seconds, the reset operation is
cancelled.)
4.
All unit settings are reset to factory
defaults, the LEDs stop flashing for 2
seconds, and then the LEDs return to
normal operation, based on the current
state of the device.
Reset to
Factory
Defaults
1
1
Resets all unit settings, including user profiles.
2
For information on LED designations and flicker behavior,
see
Table 2
.
Status Indication LEDs
The MAP Gateway communicates status via LEDs.The
following functional states are indicated using LEDs:
•
power
•
fault
•
SA/FC bus communication
•
Ethernet communication
•
Wi-Fi strength
See
MAP Gateway LED Designations and Descriptions
for a comprehensive list of MAP Gateway LED functional
information.
MAP Gateway LED Designations and
Descriptions
Table 2: LED Designations and Descriptions
Descriptions/Other
Conditions
Normal
Color
LED
Name
Off = No power
On Steady = Power
supplied by primary
voltage
On Steady
(no flashing)
Green
Power
Off = No faults/normal
operation
On Steady = Missing
hardware, missing
software, operating
system has not yet
initialized, or reset is
in progress.
Slow Flicker (1/2
second/.5 Hz) =
Startup sequence
Medium Flicker (2
seconds/2 Hz) =
Software upgrade in
progress
Fast Flicker (5
seconds/5 Hz) = Fault
Off
Red
Fault
Off = Receiving data
On Steady =
Transmitting data
Flicker = Data
transmission
Flicker
Green
SA/FC Bus
Off = Communication
not established
On Steady =
Communication
established
Flicker = Data
transmission
On Steady
Green
Ethernet
Off = No Wi-Fi signal
Wi-Fi strength is
indicated by the
number of LEDs that
are lit, with one lit LED
indicating weak
wireless signal
strength (between 1%
and 49%) and three lit
LEDs indicating
excellent wireless
signal strength (at
least 75%).
On Steady
Yellow
Wi-Fi
5
Mobile Access Portal Gateway Installation Instructions
