background image

3

Sales/Spares 01604 707012   Replacement Help Line 01604 707011

1.  

GENERAL INFORMATION

WARNING: THIS APPLIANCE MUST BE EARTHED

IMPORTANT: IT IS A STATUTORY REQUIREMENT THAT ALL GAS APPLIANCES BE 

INSTALLED BY COMPETENT PERSONS, (i.e. GAS SAFE REGISTERED INSTALLERS. 

GAS SAFE MEMBERSHIP ENQUIRIES - TEL: 0800 408 5500) IN ACCORDANCE WITH 

THE GAS SAFETY (INSTALLATION AND USE) REGULATIONS (CURRENT EDITION). 

FAILURE TO COMPLY WITH THESE REGULATIONS MAY RESULT IN PROSECUTION.

1.1 

Part of the installation and commissioning of this appliance is related to instructions for use by the heating 
engineer to the user where specific requirements may occur.

1.2 

The QuanTec Regular Kompact is a wall mounted, room sealed, condensing boiler, featuring full sequence 
automatic spark ignition and fan assisted combustion. Due to the high efficiency of the boiler, condensate 
is produced from the flue gases and this is drained to a suitable disposal point through a plastic waste pipe 
at the base of the boiler. A condensate ‘plume’ will also be visible at the flue terminal.

2.  

THE BOILER CONTROL PANEL

FIGURE 2. LCD DISPLAY FUNCTIONS

K7

K1

K6

K2

K3

K5

K4

Item

Description

K1

CH - Central H

K2

CH - Central Heating -

K3

Installer information

K4

Reset

K5

Summer/Winter mode

K6

Installer function only

K7

Installer function only

Summary of Contents for Quantec 16RK









Reviews: