If preferred, press the MANUAL
START/STOP button to activate
smoke evacuation in OPEN or LAP
mode. Smoke evacuation remains
activated until the MANUAL
START/STOP button is pressed again.
Manual activation of smoke evacuation
1.
Press the
LAP
button to switch to
LAP
mode.
3.
Adjust
RUN TIME
settings to
user-preferred time-delay intervals.
RUN TIME
options control how
long flow continues after the
energy device is deactivated when
utilizing one of the automatic
activation methods. This feature
enables evacuation of residual
smoke after the surgeon discon-
tinues activating the energy device.
2.
Adjust
FLOW
settings to user-
preferred flow-rate levels.
4.
Ensure smoke evacuation tube
is connected to MEGADYNE™
Smoke Evacuator.
41LPM
29LPM
18LPM
11LPM
5LPM
10 sec.
8 sec.
6 sec.
4 sec.
2 sec.
Using in LAP procedures
Please always refer to the Instructions for Use / Package Insert that come
with the device for the most current and complete instructions
Johnson & Johnson Medical Limited
Baird House, 4 Lower Gilmore Bank,
Edinburgh, EH3 9QP, UK
www.jnjmedicaldevices.com
© Johnson & Johnson Medical Limited 2020, 154866-201002 UK
