Johnson Amplification Integrated Modeling Amplifier User Manual Download

Page: 84 / 116

3. At this point, use the

<2>

knob to select the Bank to be named. Once the Bank has been selected, turn the

<4>

knob to rename the

Bank. The display now appears like this:

4. To exit the naming bank assignment, press the

<Utility>

button.

5. Using the

<1>

knob, change the character to the one you want in the selected position.

6. When the correct character is displayed in that position, use the

<Page>

knob to scroll the cursor to the next character you want to

change.

7. Use the

<2>

knob to select numbers, the

<3>

knob to insert spaces and the

<4>

knob to copy and paste characters.

8. To copy a character, position the cursor under the character you want to copy (using the

<Page>

knob), then turn the

<4>

knob

clockwise. To paste the copied character, position the cursor where you want to paste the character, then turn the

<4>

knob counter-

clockwise.

9. To abort the procedure, push either the

<Preset>

button to take you to Preset Mode, the

<Edit>

button to take you to FX Edit Mode, or

the

<Utility>

button to take you to Utility mode, depending upon which mode you want to enter.

Un-Linking or Viewing Parameter Control

1. To un-link or view a parameter that has been assigned to a footswitch, Expression Pedal or LFO simply press the

<Assign>

button twice

The display will tell you which parameter is linked to which footswitch. To unlink, simply turn the

<1>

knob and the top line of the display

will now read:

Available Link

2. To see any other parameter links in the selected program, press the

<Assign>

button twice and then turn the

<Page>

knob.

Name:

op 5

FACTORY

USER

CAP

CHANGED

LINK

nbr

CHANGED

LINK

Ins

CHANGED

LINK

COP

CHANGED

LINK

WAH

TUBE

L/R OUTS

DIGITAL

CLIP

GATE

Section - 6 The J-12 Foot Controller

Johnson Millennium

User Guide

Summary of Contents for Integrated Modeling Amplifier





















































































































Search results

Summary of Contents for Integrated Modeling Amplifier

Reviews:

Related manuals for Integrated Modeling Amplifier

Brands by name

Popular brands

Johnson Amplification Integrated Modeling Amplifier, User Manual

Search results

Summary of Contents for Integrated Modeling Amplifier

Reviews:

Related manuals for Integrated Modeling Amplifier

Brands by name

Popular brands