Johnson Amplification Integrated Modeling Amplifier User Manual Download | Manualshive

Page: 16 / 116

background image

Integrated Amplifier Modeling

Vintage and Modern Amp Models

: There is really no need to have numerous vintage or modern amplifiers in storage or cluttering up space.

The Millennium's unique Integrated Amplifier modeling puts almost every amplifiers’ tone under the hood. This feature gives you modeled
emulations of many great amplifiers including: Vintage Vox™ AC-30 top boosts™, mid 70s’ Marshalls™ Master lead, Mesa Boogie™ Dual
Rectifier stack and combos and Mark II stack and combo™, Matchless™ DC-30s and Fender™ Twins and Soldano™ SLOs. To call up any of
these amplifier modelings, simply press any one of the 5 Amplifier model buttons on the front panel and the selected amplifier model is
instantly called up.

Johnson Amplifier Models:

The Johnson Amplifier models offer amplifier tones that you never thought possible out of stock (un-modified)

amplifiers. We at Johnson Amplification have basically taken the best of all amplifiers and performed the custom mods on them. This means
that you can now have the custom Marshall™ with the higher gain stages, or that Soldano™ with more low end, and still remain ultra quiet.
And, if having these custom amp modifications were not enough, the Johnson Amplifier custom modules give you the ability to combine two
Amplifier paths on the right and the left at the same time to produce “mammoth” guitar tones when a morphing expression pedal is assigned.

A-B channel switching:

To give each modeled amplifier in the Millennium even more flexibility, we have included A-B channel switching in

each of the amp models. This is a great function to use for adding distortion or boosting for solos. The A-B channel selector is conveniently
located on the front panel of the Millennium and can be given expression pedal assignment for quick switching on the floor with the J-12 or
J-3 foot controllers or via a MIDI device.

Amplifier Model Types

The following describes the Amplifier model selections when any one of the six amplifier model and channel buttons (shown below) are
pressed. Successive presses of each button will take you through the menu of available amp types for each amplifier model.

American Stack

:

Dual Rectifier, Boogie MK II, Soldano SLO

American Combo

:

‘65 Blk Face Twin, Twin Reverb Brite, Matchless DC-30 -1, Matchless DC-30 -2, Boogie MK II Combo, Rectif Combo

British Stack

:

Marshall Master 1, Marshall Master 2, Marshall JCM 800, Hot Rod Marshall MSTR

British Combo

:

‘63 AC 30 Top boost, ‘63 AC TBoost Dirty, AC 30 TB Cln/Drty, Marsh JCM 800 Cmbo

Johnson

:

JohnsonCln/Dirty, JohnsonDrt/HiGain, JohnsonCln/HiGain, Fender/Soldano, Fender/HotMarshal, Fender/MatchDrt, Fender/Rectifier,

Matchless/Soldano, Matchless/HotMarshall, Match/Rectifier, Vox/Marshall, Vox/Matchless, Vox/Rectifier, Overdrive, Fuzz, Heavy Sustain,

Clean/Fuzz, Low Gain/Fuzz, High Gain/Fuzz

Channel

:

Pressing this button will toggle between the 2 channels within every amplifier model.

Fender™, Marshall™, Mesa Boogie™, Matchless™, Soldano™ and Vox™ are all registered trademarks and are in no way associated with

Johnson Amplification.

Amer Stk

A

B

Brit Stk

Brit Cmbo

Channel

Johnson

Amer Cmbo

Section -1 Introduction

Johnson Millennium

User Guide

8

«
...
14
15
16
17
18
...
»

Summary of Contents for Integrated Modeling Amplifier





















































































































Reviews:

No comments

Related manuals for Integrated Modeling Amplifier

Brand: Yamaha Pages: 4

Brand: Carson Pages: 12

Brand: Teac Pages: 4

Lifestyle 8 Series II

Brand: Bose Pages: 41

Brand: Harman Kardon Pages: 50

Amplifier 801-40

Brand: Raymer Pages: 4

Brand: Zeck Audio Pages: 14

Brand: Nova Pages: 16

Brand: VINCENT Pages: 52

Brand: Cary Audio Design Pages: 8

FM-5F6MB Mini Bassman

Brand: FRENZEL Pages: 5

Brand: Harman Kardon Pages: 44

Brand: Advance acoustic Pages: 18

Brand: Advance acoustic Pages: 18

Brand: AUSTRALIAN MONITOR Pages: 20

Brand: AE Techron Pages: 24

Brand: e-motion Pages: 13

Brand: Kenwood Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands