Johnson Amplification Integrated Modeling Amplifier User Manual Download

Page: 73 / 116

To initiate an individual Default dump from the Millennium, please perform the following procedure:

1. Press the

<Utility>

button and scroll to Page 9 of the Utility menu using the

<Page>

knob. The display reads:

2. Using the function

<2>

knob, select the Effect Module whose Default you want to dump.

3. Use the function

<4>

knob to select the User Default you want to dump.

4. To initiate the dump, turn the function

<1>

knob. The Information line briefly reads:

Sending User Default...

after which it returns to the User default screen.

Bulk Dump

: This option allows you to dump all resident presets in memory to an external recording device, like a patch librarian, computer,

or sequencer for backup, storage, or organization. This option dumps all presets simultaneously. It does not send any Millennium system
information, such as SysEx Device channel or Presets maps.

To perform a SysEx Bulk Dump of all Millennium presets, do the following:

1. Press the

<Utility>

button and scroll to Page 7 of the Utility menu using the

<Page>

knob. The display reads:

2. To initiate a bulk dump, turn the

<2>

knob. The Information line of the display reads:

SENDING BULK DUMP...

after which the display returns to the Dump screen. Bulk Dumps are very large and may take several minutes to complete.

System Dump

: This is the option to use for dumping system data to an external MIDI or SysEx recording device. All the item settings in the

Utility menu are sent using this option. Presets are not included in this dump.

The System Dump procedure is the same as the Bulk Dump procedure (see above), except that to initiate a System Dump, turn the

<4>

knob.

SysEx Dump: Bulk System

FACTORY

USER

%kHz
msdB

CHANGED

LINK

%kHz
msdB

CHANGED

LINK

%kHz
msdB

YES

CHANGED

LINK

YES

CHANGED

LINK

PAGE

COMP

WAH

TUBE

L/R OUTS

GATE

SEAMLESS

BANK

UsrDflt:Dual Cho User 1

FACTORY

USER

%kHz
msdB

Yes

CHANGED

LINK

%kHz
msdB

---

CHANGED

LINK

%kHz
msdB

CHANGED

LINK

U 1

CHANGED

LINK

PAGE

WAH

TUBE

L/R OUTS

GATE

BANK

Johnson Millennium

User Guide

Section - 5 Advanced Topics

Summary of Contents for Integrated Modeling Amplifier





















































































































Search results

Summary of Contents for Integrated Modeling Amplifier

Reviews:

Related manuals for Integrated Modeling Amplifier

Brands by name

Popular brands

Johnson Amplification Integrated Modeling Amplifier, User Manual

Search results

Summary of Contents for Integrated Modeling Amplifier

Reviews:

Related manuals for Integrated Modeling Amplifier

Brands by name

Popular brands