Page 23
VALVES
Valve clearance for the 300cc motors are .06-.10 intake and exhaust
BRAKES
WARNING:
Brake fluid is very dangerous. Avoid contact with mouth and eyes. If ingested or in
contact with eyes, call 911.
FRONT BRAKE
Start by checking the fluid level. This can be done visually via the fluid check window (1).
If necessary, add brake fluid ( DOT 4 ).
To remove the pads:
•
Remove two bolts (1) from caliper to fork leg mounting bracket
•
Slide caliper off rotor
•
Remove allen head pins (2)
•
Discard old pads
•
Make sure spring stays facing the same direction, install brake pads
•
Install both allen head pins (2)
•
If needed, pry apart pads, slide on a disk and install mounting bolts (1) to fork leg