Page 19
Break In
During the first 250 miles, avoid full throttle use. Keep the engine under 6000 rpm, the
maximum speed should not exceed 50 MPH. Breaking in the engine correctly will ensure
long engine life.
NOTE: Motorcycle must be serviced between 100-105 miles by an authorized Johnny Pag
Motorcycles dealer to keep warranty valid.
MAINTENANCE
ENGINE OIL
Engine oil quality is the chief factor affecting engine performance and service life.
The motorcycle uses engine oil SAE 10w/40 API SG when being sold. Use 10w-30 after
the first 150 mile break in period. There is no external oil filter. Recommended cleaning of
the oil screen is every 1000 miles.
OIL LEVEL
Check the oil level before each ride. To do this, remove the dipstick (1) and wipe it clean.
Reinsert the dipstick into the crankcase but do not screw it in. Remove the dipstick and
check that the fluid is between the upper (2) and lower (3) level marks. DO NOT
OVERFILL.
CAUTION:
