Page 20
Running the engine with insufficient oil can cause serious damage to your engine.
CHANGING ENGINE OIL
To drain the engine oil, remove the engine drain bolt (1). Let the oil drain
completely before refilling the case with oil. If cleaning the oil screen, be sure to wait until
all the oil has drained before removing the right side crankcase cover (2). Once the oil is
drained, remove the right side crankcase cover (2) and remove the oil pump (3). With the
oil pump removed, you can easily remove the oil screen (4) and wash thoroughly with
carburetor cleaner. Reinstall oil screen onto the oil pump and reinstall the oil pump onto
the engine. Replace the crankcase gasket and install the right side crankcase cover. Refill
the oil to the correct level.
Please call your local JPM dealer to get replacement gaskets and oil screens, if
necessary. Part numbers can be found on in your parts book or by visiting JohnnPag.com.
SPARK PLUG REPLACEMENT
CAUTION:
Be sure the ignition is off and the engine run switch is in the off position before you
replace the spark plugs.
First remove the side head covers (1). This will expose the coil wire (2). Pull the coil wire
off the spark plug. This will expose the spark plug (3). Use a spark plug socket to remove
the spark plug.
Cross reference plugs:
Winter (colder riding) NGK CR5HSA
Summer (warmer riding) NGK CR7HSA
