manualshive.com logo in svg

Johnny Vac JVC85BCT, User Manual, Page: 3 / 40

Share
Download
Johnny Vac JVC85BCT User Manual Download Page 3

- 3 -

User Guide

JVC85BCT

Safety Precautions................................4

Safety Labels .......................................7

Machine Components ..........................8

Symbols on Control Panel  ..................10

Machine Installation  ..........................10

Unpack the Machine....................................10
Install the Battery  .......................................11

How the Machine Works  ....................12

Cleaning Brush and Pads....................12

Machine Installation  ..........................13

Connect Squeegee Assembly ......................13
Install Brush/ Pads  .....................................14
Fill the Solution Tank .................................. 15

Machine Operation  ............................15

Pre-operational Check ................................16
Start the Machine .......................................16
During Operation ........................................18
Battery Electricity Meter  .............................19
Overload Circuit Breaker .............................19
Timer .........................................................20

Drain the Tanks  .................................21

Drain the Recovery Tank .............................21
Drain the Solution Tank  ............................. 21

Battery Charge  ................................. 22

Specifications for Charger  ......................... 22
Use of Charger  .......................................... 22
Battery Installation and Use ....................... 23
Intelligent Charger LED Indicator ................ 24

Machine Maintenance  ...................... 25

Daily Maintenance...................................... 25
Monthly Maintenance................................. 27
Half-yearly Maintenance ............................ 28
Squeegee Blade Replacement .................... 29
Squeegee Blade Adjustment....................... 30

Push, Tow and Transport the Machine...... 33

Machine Storage ........................................ 33
Troubleshooting.......................................... 34
Fault Codes of the Charger......................... 36

Specifications.................................... 36

Machine dimension/capacity...................... 36
Type .......................................................... 37
Machine dimensions  ................................. 38

C O N T E N T S

Summary of Contents for JVC85BCT









































Reviews:

No comments